硅酸钙板

 

类型TYPE

立体浮雕板3D Sculpture board

优特力浮雕天花板是在优特力硅酸钙板表面经凹凸图纹处理后制成。具有立体视觉效果，尤其适应于低空吊顶空间。

Utility ceiling boards with 3D sculpture are made from the Utility board with the surface being subject to concave/convex drawing treatment.With 3D visualized effects,especially suitable for low profile ceiling space.

平面精印板Plane precision printing board

优特力精印天花板是优特力硅酸钙板表面经精致印刷后制成，花型时尚别致，设计独特新颖，为大多数场合的吊顶空间营造和谐舒畅的氛围。

The Utility precision printing ceiling boards are made from the Utility CS board with surface being precise printed.Fancy and fashionable in patterns.Unique and novelty in creating a harmonic atmosphere with the application of ceiling boards.

穿孔吸音板Perforated sound absorbing board

优特力穿孔吸音板是优特力硅酸钙板深加工产品，是通过压力设备对优特力硅酸钙板冲孔加工而成。加工是可以通过高速模具来调节孔径大小，并排列出各种美丽的花型。

Made from the Utility boards with perforated holes by pressured equipment.Hole sizes can be changed by dies adjustment.

环保绝尘板Environment protection type

优特力环保绝尘板是在精印天花板的表面喷涂一层防水UV漆，对防水、防潮和绝尘有更好的效果，属于高档次的装饰建材产品。

These boards are made from the precise printing ceiling boards with the surface being sprayed a layer of water-proof  UV paints.With good water-proof,damping-proof and dust-rejecting effects,suitable for high grade decorative and construction products.

 

性能PERFORMANCE

健康环保Good for health and environment

防火防潮Good in humidity-proof and fire prevention

隔热隔音Good heat and sound insulation

高强度High strength

优越的经济性Good economy

兼容广泛Wide compatibility

 

主要用途MAIN APPLICATION

吊顶、隔墙、贴护墙

Suspended ceiling boards,Partition walls,Wall protective boards

也使用于护墙、活动地板、桌面板、广告牌、物品柜、厨厕墙板

Also used as wall protective boards,movable floor boards,desk face boards,sign posts,cabinets,wall for kitchen and toilet.

 

使用场所USING OCCASIONS

商用建筑、工业建筑、住宅建筑、公共场所

Commercial buildings,Industrial buildings,Residential buildings,Public occasions

切割方式Cutting methods

用多用刀、电工刀或碳化尖刀，划下直线，深度为板厚的1/3左右。用力往下折断开，板边有毛刺是可用锉刀挫平。

Score straight lines at a depth of one-third of the board by using multi-purpose knife,electrician’s knife or carburized pointed knife,and then,break the board by force downwards.File off burrs on edges of the board.

普通手锯便可进行锯割。

Cut the board by average handsaws.

使用手提电动直锯或圆盘锯切割。

By hand-held electric steaight saw or disk saw.

 

搬运TRANSPORTATION

装卸货车或施工作业时，应轻拿轻放，小心地搬运优特力板，以避免边、角、面受到损伤，同时须避免板材过度弯曲而破损。需要两名工人一起将板材抬起，双臂尽量分开抬板的长边。禁止单人搬运。

When you load and unload it or install it you should carry and put it carefully so as to avoid the edges,surfaces and angles being damagsd meanwhile we should not over bend it order to protect it..

 

了解更多