尼龙—6切片PA6
发布时间 2024-11-11 09:31:52
产品描述
| 材质 | 工程塑料 |
|---|---|
| 用途 | 注塑件 |
| 外观 | 白色 |
| 长度 | 3 |
| 每件重量 | 25公斤/袋 |
尼龙—6切片
特征：尼龙—6切片生产采用两端聚合、连续萃取、联系干燥和DCS控制，产品为无色透明，无机械杂志、粒度均匀的圆柱形颗粒。切片规格（直径×长）为2.0—2.5×2.0—2.5。
用途：尼龙—6切片粘度在2.4—3.6之间，可满足高速纺和拉膜生产要求，广泛用于民用丝、工业丝、尼龙6薄膜以及高强度工程塑料的生产。
Nylon 6 Chip
The nylon 6 chip plant of Baling Petrochemical is one of the largest plants in China The output or Eagle King nylon 6 chip is 42 kt annually. The primary technology and equipments of polymerization unit was imported from Germany. The main production technologies include two-state polymerization, continuous extraction, continuous drying and DCS control , which reaches the advanced international level.
Characteristics:
Nylon 6 chip is colorless transparent column-shaped particles with unitform particle size and no mechanical impurities. The specification of the chip is 2.0-2.5×2.0-2.5(diameter×length)
Application:
Nylon 6 chip has the viscosity of 2.4-3.6, satiosfying the requirement of high-speed spinning and drawing film. It can be widely used in the filed of civit yarn, industrial yarn, nylon 6 film and high-strength engineering plastics.
包装：
用内衬铝箔的聚丙烯编织袋或内衬铝箔的牛皮纸包装袋冲氮气包装，每袋净重25kg。
尼龙—6切片技术规格（企业标准Q/SH3185 021-2005）