原装进口瑞典伊萨OK Autrod 5183铝镁焊丝ER51

备注：一口价为一公斤价格！

包装：重量7.26公斤一盘！

名称：OK Autrod 5183铝镁焊丝

标准：GB/T10858 SAI5183  AWS A5.1 ER5183

成分：Mg=4.3-5.2%；Mn=0.5-1.0%；Cr=0.05-0.25；Ti≤0.15%；Al余量。

说明：OK Autrod 5183是含镁近5%及较高锰含量的铝镁焊丝,具有良好的耐蚀性、抗热裂性，强度高可锻性好。焊缝阳极化处理后仍为白色，能为焊接接头提供良好的配色，对于某些合金来讲，焊接接头强度略高于ER5356。

用途：用作铝镁合金氩弧焊的填充金属，在机车车厢、化工压力容器、核工业、造船、制冷、锅炉及航空航天工业上获得应用。

瑞典伊萨OK Autrod 5183/ER5183铝镁焊丝 

OK Autrod 5183

GMAW

OK Autrod 5183 is designed to provide the highest possible strength in the as-welded condition of alloy AA 5083 and similar high-magnesium alloys. The more common OK Autrod 5356 typically fails to meet the as-welded tensile requirements of AA 5083. The alloy is typically used in marine and structural applications where high strength, high fracture toughness for impact resistance and exposure to corrosive elements are important. The alloy is not recommended for elevated temperature applications due to its susceptibility to stress corrosion cracking. The alloy is non-heat treatable.
Welding current
DC(+)

Classifications	Approvals	Typical all weld metal composition, %	Typical mech. properties all weld metal
SFA/AWS A5.10 ER5183 EN ISO 18273 S Al 5183 (AlMg4,5Mn0,7(A)) JIS Z 3232 A5183	ABS ER5183 (For lots starting with RB) BV WC CE EN 13479 ClassNK KAl5RCG(I-1)(I-4) (For lots starting wi CWB AWS A5.10 DB 61.039.03 DNV 5183 GL RAlMg4.5mN LR WC/I-1 VdTüV 04666	Si 0,40 Mn 0,8 Cr 0,15 Cu <0,10 Ti <0,15 Zn <0,25 Fe <0,40 Mg 4,8 Wire composition	Yield stress, MPa 125 Tensile strength, MPa 275 Elongation, % 17 Elongation, % 17

Diameter, mm	0.8	1,0	1,2	1,6	2,4
Arc voltage, V	13-24	15-26	20-29	25-30	26-31
Welding current, A	60-170	90-210	140-260	190-350	280-400

品牌：瑞典伊萨ESAB

TB286.fbP3z9KJjy0FmX

OK 盘丝5183

mmexport156619924206

O1CN012AglHOTsqexM7t

O1CN012GHT6RzzqeOoKM

了解更多